The stainless steel top housing series of magnetic stirrers are most compact models. PMDC motor gives higher torque even at lower speeds and maintains speed stability despite viscosity or volume changes.  Accurate stepless speed control allows smooth variation upto to 1200rpm.  Stirring is accomplished by a small Teflon coated magnetic paddle to be placed in the container.

Available Capacities: 500ml, 1 Litre, 2 Litres, 5 Litres

With Hot Plate is also available.

The apparatus is made of mild steel duly powder coated by a powder coating finish.  The heating block is made of solid aluminium with 125Watts, which is controlled by a SUNVIC regulator device.  In the heating block there are provisions to keep two capillary tubes and a thermometer to find out the temperature at which the solid phase changes into liquid phase.

There is a lens in the front side of the instrument and a light source inside the instrument to manify and illuminate the zone of melting.

Temperature Range : : 5°C above ambient  to 360°C. with an accuracy ± 2°

Wall mounting type: The entire fabrication is made of stainless steel and supplied in highly polished finish.  The unit comprises of a main boiling chamber with a high dome lid and provided with a water gasket and tubular condensing column with an automatic water level arrangement to maintain the water level inside the chamber always constant.

Cyclomixer

it is a variable speed mixer to eliminate time consuming hand mixing. Holding tube against vibrating rubber cup does rapid mixing of contents. Speed regulator controls the degree of vibration. A unique touch feature operates the unit when tube is pressed on the rubber cup.

adaptors

these adaptors are interchangeable and is to be ordered separately.

adaptor  for mixing upto 18 micro tubes (6x0. 5ml,6x0. 4ml, 6x1. 5ml)

adaptor  useful for tube bottles or flasks upto maximum capacity of 250 ml

Lab stirrer:

• reliable performance even in continuos use
• improved carbon brush life & digital rpm indicator,
• stepless electronic speed regulator for smooth and stable speed control
• high torque even at low speeds & motor with overload and over heating protection
• hollow shaft in geared models permitting height adjustment
• chuck for easy inter changeability of shaft
• stirring shaft ss 316l & retort rods ss 304.