Laminar Flow - Laminar Air Flow, Bio Safety Cabinets and Fume Exhaust Hood Manufacturer & Exporter

Laminar Flow

Leveraging on our vast infrastructural facilities, we are able to offer a wide range of laminar flow equipment. Manufactured using superior quality raw material such as stainless steel, glass and rubber, this equipment find major applications in laboratories to perform biological tests. Further, keeping in mind the diverse requirements of our clients, we offer this equipment in various customized sizes.

	Laminar Air Flow

Horizontal Laminar Flow cabinet directs the air through PRE Filter at the bottom level of the cabinet and the airflows horizontally through HEPA filter towards the work area. Again the air is discharged back to the room.

Unit consist of HEPA filter, PRE filter, Blower Assembly, S.S Table Top, U.V Lamp, transparent front door, manometer, Gascock, Side View Glass panel and castor wheel and level jack.

SL.NO	WORKING AREA
1	2’ X 2 X 2’
2	3’ X 2’ X 2’
3	4’ X 2’ X 2’

Send Enquiry

	Bio Safety Cabinets

The Bio-safety cabinets are used for personal safety, product safety and environment safety applications. Based on the application the type of model/ classification is elected.

Technical Specification

Cleanliness : Class 100.

Particle retention : 0.3 micron & above.

Velocity : 90 ±20%

Standard : US Federal Standard 209E

Noise level : 65db±5%

Illumination : 750 to 800lumen

Power Supply : 220V single phase 50 cycle.

Application:

Most suitable for bacteriological, toxicology, where the presence of highly air borne particles, bacteria and viral need to be controlled to provide clean working condition.

BIO SAFETY CABINET – CLASS I

100% air Exhausted through HEPA to the outside or into the room. Provides only user and environmental safety and not product safety.

BIO SAFETY CABINET – CLASS II

70% Re-circulation and 30% Exhaust Blower at bottom of cabinet with d through HEPA to the outside or into the room. Provides only user and environmental +ve pressure in pleanum at the back side. Provides product, environment and user safety..

SL.NO	WORKING AREA
1.	4’ x 2.5’ x 3’
2.	5’ x 2.5’ x 3’
3.	6’ x 2.5’ x 3’

Send Enquiry

	Fume Exhaust Hood

With the advent of the occupational safety & Health act (OSHA) removal of toxic fumes and gases from the laboratory has become even more important.

It is a ventilated enclosure in which gases, vapours and fumes are contained. An exhaust fan situated on the top of the laboratory building pulls air and airborne contaminants in the hood through ductwork connected to the hood and exhausts them to the atmosphere. It further controls exposure of the hood user and lab occupants to hazardous or odorous chemicals and prevent their release into the laboratory.

It draws room air through the open sash. Pass through the bypass openings above and below the sash. It produces a lower face velocity than auxiliary air model, therefore best for use with fragile equipments or specimens.

Our Fume Hood covers the following standards:
OSHA, NRC, ANSI, SEFA, ACGIH

SL.NO	WORKING AREA
1.	4’ x 2.5’ x 3’
2.	5’ x 2.5’ x 3’
3.	6’ x 2.5’ x 3’

Send Enquiry